Set up your Layer3 TV remote control to communicate with your TV

If this is the first time you're using your Layer3 TV remote control, you might need to set it up to work with your TV. 


Tip: The button placement on your remote control may be slightly different from the above diagram.

Setup Instructions

  1. Press and hold the Select (center) and Exit buttons until the LED blinks twice.
  2. Press the Select (center) button. The LED will blink once.

  3. Press 1.

  4. Find your TV's brand from the chart below. While pointing your remote at the TV, press and hold the matching number button. Release the button as soon as the TV turns off.
    Digit TV brand
    1 LG/Zenith
    2 Panasonic
    3 Philips/Magnavox
    4 RCA
    5 Samsung
    6 Sanyo
    7 Sharp
    8 Sony
    9 Toshiba
    0 Visio
  5. Press the Power button on the remote control to turn your TV back on.

If you're still having trouble, see the advanced remote control setup manual. You can also contact Customer Support anytime by email, phone, chat, or social media.

Was this article helpful?
10 out of 11 found this helpful
Have more questions? Submit a request